View HH53PAC12V50HZ_6817698.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/25 03 miniature control relays description the hh52, 53 and 54 are a series of miniature general purpose relays specially designed for users demanding small size, sturdy construction and high electrical capacity. mechanisms are furnished in polycarbonate dust-proof enclosures and are recommended for a multitude of electrical control applications for their reliability and compact size. continuous duty coils, either ac or dc are available for voltages up to 240v ac or 120v dc. contacts can be supplied in 2pdt, 3pdt, 4pdt arrangements. continuous current ratings are 3, 5 and 7 amps. many terminal types are available for solder, plug-in or printed circuit board mounting. features 3, 5 and 7 amp. contacts 2pdt, 3pdt and 4pdt reliable operation, long service life high dielectric strength solder, pc board, wire wrap and screw terminal socket ac or dc coils barriered contacts for opposite polarity available dust proof enclosures approved by ul, csa and t?v ul recognized file no: e42419, e90265 (socket) csa: lr 20479 t?v: license no. r9251339 (hh52) r9251340 (hh53) r9251341 (hh54) t9251612 (tp58, 511, 514) t9251425 (rz, fx) general information contacts miniature relays can be supplied with contacts that meet most electrical and mechanical contact requirements. the standard hh52, 53 and 54 series are of the single contact type as illustrated. the hh52w (2pdt) and hh54w (4pdt) relays are supplied with bifurcated contacts. these bifurcated contacts are with good conducting characteristics and are recommended where limited control power is available. the dielectric strength is 1000 volts rms 50/60hz (between open contacts) which makes them more than adequate for power circuit use. coils coils are available with nominal voltages within the following ranges. hh54p hh53p hh52p coil voltage power consumption 6 to 120v dc approx. 0.9w 6 to 240v ac approx. 1.0va (50/60hz) (60hz) kkd05-133 af91-854 kkd05-132 terminals sockets there is almost infinite choise of sockets. they can be adapted to all types of wiring including solder type, standard screw terminals, wire wrap and printed circuit. sockets for rail mounting use are also available. plug-in type terminal pc board type terminal sf-2006 type hh52u hh52, 52w hh53 hh54u hh54, 54w rated thermal current 7 amps 5 amps 5 amps 5 amps 3 amps contact arrangement are as follows: industrial control relays miniature control relays hh52, 53, 54 flange mounting standard sf-2005 special purpose relays can be supplied with diode for surge suppression, for operating display devices such as led's, and magnetically held type. enclosures all miniature relays are enclosed in sturdy heat-resistant polycarbonate covers providing protection against dust and dirt. bifurcated contact single contact contact arrangement 2pdt 2pdt 3pdt 4pdt 4pdt solder pc board screw terminal rail mounted wire wrap sd-895 sd-894 sd-893 af91-870 sd874
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/26 operating status indicator all relays can be supplied on request with a visual indicating signal? light emitting diode (led). led's are fitted to relays with nominal operating voltages up to 240 volts. the led emits highly visible red light for ac and green light for dc when power is applied to the relay coil, an extremely useful signal when trouble shooting either equipment or a system. versions industrial control relays miniature control relays hh52, 53, 54 12v ac or less 6v dc or less 24v ac or more 12v dc or more af91-855 surge suppression we can also supply relays with a diode (or cr) for surge suppression. the highly efficient diode (or cr) is connected in parallel with the coil in order to suppress the surge generated within the coil. consequently this coil can be used in electric circuits which include highly sensitive relays or transistors, etc. without interfering with their operation, so increasing the dependability of the equipment. sdo-0241m dc diode ac with extra pick-up operating coil this type is recommended for use in poor power supply environments. pick-up voltage: 65% of rated voltage (at 20?) drop-out voltage: 10% of rated voltage (at 20?) mechanical durability: 10 million operations other specifications are the same as those of the basic model. high capacity type this type is suitable for switching a load like solenoid . the current rating of the contacts is 7a for hh52pu and 5a for hh54pu. other specifications are the same as those of the basic model. with au-plated ag contact type hh -j has gold-plated contacts. (note: models with bifurcated contacts and 4pdt high-capacity models are provided with gold-plated contacts as standard, even if their type number has no j.) with operation indicator and surge suppression device this type has a built-in operation indicator and suge suppressor. dc af93-345 dual coil magnetically held one coil firmly holds the contacts in one position, the second coil releases them. this relay has a good memory stability because it will maintain the on condition during loss of power. it operates on a momentary pulse to either coil. the relay saves space as well as power, since a single unit occupies half the space of a mechanically interlocking latching relay of the same rating. voltages: 6v?10v ac, 6v?8v dc sf-2010 coil led 14 (+) 13 (? coil led 14 (+) 13 (? coil led diode (6v dc or less) 14 (+) (? 13 coil 14 13 cr (12v ac or less) coil diode (12v dc or more) 14 (+) (? 13 cr (24v ac or more) coil 14 13 release coil 12 (+) (? (+) (? 9 latch coil 14 13 diode 14 (+) 13 (? cr 14 (+) 13 (?
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/27 03 ?? mounting and wiring code description ?? blank soldering b1 pc board r2 wire wrap surface mounting screw terminal (m3.5) s0 for hh22, 23, 24 rail mounting screw terminal (m3.5) x0 for hh22, 23, 24 x2 for hh52, 53, 54, hh62, 63, 64 rail mounting screw terminal (m3) x1 for hh52, 53, 54 ordering code system relay r m 2c p w r f-ah ? ? ?? ? ? ? ? ?? industrial control relays ordering code system hh52, 53, 54 type ? product category code description rc ontrol relay ? series category code description m miniature control relay (hh52 to hh54) p miniature power relay (hh62 to hh64) c general purpose relay (hh22 to hh24) ?? contact arrangement code contact ?? arrangement 2c 2pdt 3c 3pdt 4c 4pdt 3m 1no+1nc+spdt 4m 2no+1nc+spdt 42 2pdt with extra pick-up coil ? mounting code mounting p plug-in mounting b pc board mounting s flange mounting ? contact form code form blank single w bifurcated u high capacity (hh52, 54) j single (au-plated) ? version code description blank standard r magnetically held ? accessory code description blank not provided fw ith surge suppression diode (dc) g with led indicator and surge suppression diode (dc) l with led indicator c with surge suppression (cr) a with led indicator and surge suppression cr (ac) ?? operating coil code coil voltage ?? aa 6v ac 50/60hz ab 12v ac 50/60hz ae 24v ac 50/60hz af 48v ac 50/60hz a1 100?10v ac 50/60hz ah 110?20v ac 50/60hz a2 200?20v ac 50/60hz am 220?40v ac 50/60hz da 6v dc db 12v dc de 24v dc df 48v dc d1 100?10v dc socket r x 58 x2-cr zt ???? ?? ?? ?? ? product category code description rc ontrol relay ? series category code description x socket ?? application code type ?? 58 tp58 (for hh52p) 51 tp511 (for hh53p) 54 tp514 (for hh54p) 68 tp68 (for hh62p) 61 tp611 (for hh63p) 64 tp614 (for hh64p) 8g 8gb (for hh22p) 38 tp38 (for hh22p) 1g 11gb (for hh23p) 31 tp311 (for hh23p) ?? socket with surge suppression device code description ?? cr provided with cr circuit c1 provided with 100v z-trap (diode) c2 provided with 200v z-trap (diode) ?? approvals code standards ?? zu ul zs ul/csa zt t?v zl lloyd
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/28 industrial control relays miniature control relays hh52, 53, 54 versions relay classification contact form mounting and plug-in pc board flange arrangement type ordering type ordering type ordering code code code standard without led single 2pdt hh52p rm2cp- hh52b rm2cb- hh52s rm2cs- 3pdt hh53p rm3cp- hh53b rm3cb- hh53s rm3cs- 4pdt hh54p rm4cp- hh54b rm4cb- hh54s rm4cs- bifurcated 2pdt hh52pw rm2cpw- hh52bw rm2cbw- hh52sw rm2csw- 4pdt hh54pw rm4cpw- hh54bw rm4cbw- hh54sw rm4csw- with led single 2pdt hh52p-l rm2cpl- hh52b-l rm2cbl- 3pdt hh53p-l rm3cpl- hh53b-l rm3cbl- 4pdt hh54p-l rm4cpl- hh54b-l rm4cbl- bifurcated 2pdt hh52pw-l rm2cpwl- hh52bw-l rm2cbwl- 4pdt hh54pw-l rm4cpwl- hh54bw-l rm4cbwl- with surge single 2pdt hh52p-f rm2cpf- hh52b-f rm2cbf- hh52s-f rm2csf- suppression diode 3pdt hh53p-f rm3cpf- hh53b-f rm3cbf- hh53s-f rm3csf- 4pdt hh54p-f rm4cpf- hh54b-f rm4cbf- hh54s-f rm4csf- bifurcated 2pdt hh52pw-f rm2cpwf- hh52bw-f rm2cbwf- hh52sw-f rm2cswf- 4pdt hh54pw-f rm4cpwf- hh54bw-f rm4cbwf- hh54sw-f rm4cswf- with surge single 2pdt hh52p-fl rm2cpg- hh52b-fl rm2cbg- suppression diode 3pdt hh53p-fl rm3cpg- hh53b-fl rm3cbg- and led 4pdt hh54p-fl rm4cpg- hh54b-fl rm4cbg- bifurcated 2pdt hh52pw-fl rm2cpwg- hh52bw-fl rm2cbwg- 4pdt hh54pw-fl rm4cpwg- hh54bw-fl rm4cbwg- with surge single 2pdt hh52p-cr rm2cpc- hh52b-cr rm2cbc- hh52s-cr rm2csc- suppression cr 3pdt hh53p-cr rm3cpc- hh53b-cr rm3cbc- hh53s-cr rm3csc- 4pdt hh54p-cr rm4cpc- hh54b-cr rm4cbc- hh54s-cr rm4csc- bifurcated 2pdt hh52pw-cr rm2cpwc- hh52bw-cr rm2cbwc- hh52sw-cr rm2cswc- 4pdt hh54pw-cr rm4cpwc- hh54bw-cr rm4cbwc- hh54sw-cr rm4cswc- with surge single 2pdt hh52p-crl rm2cpa- hh52b-crl rm2cba- suppression cr and 3pdt hh53p-crl rm3cpa- hh53b-crl rm3cba- led 4pdt hh54p-crl rm4cpa- hh54b-crl rm4cba- bifurcated 2pdt hh52pw-crl rm2cpwa- hh52bw-crl rm2cbwa- 4pdt hh54pw-crl rm4cpwa- hh54bw-crl rm4cbwa- magnetically held single 2pdt hh52p-r rm2cpr- hh52b-r rm2cbr- hh52s-r rm2csr- bifurcated 2pdt hh52pw-r rm2cpwr- hh52bw-r rm2cbwr- hh52sw-r rm2cswr- high without led single 2pdt hh52pu rm2cpu- hh52bu rm2cbu- hh52su rm2csu- capacity 4pdt hh54pu rm4cpu- hh54bu rm4cbu- hh54su rm4csu- with led single 2pdt hh52pu-l rm2cpul- hh52bu-l rm2cbul- 4pdt hh54pu-l rm4cpul- hh54bu-l rm4cbul- with surge single 2pdt hh52pu-f rm2cpuf- hh52bu-f rm2cbuf- hh52su-f rm2csuf- suppression diode 4pdt hh54pu-f rm4cpuf- hh54bu-f rm4cbuf- hh54su-f rm4csuf- with surge single 2pdt hh52pu-fl rm2cpug- hh52bu-fl rm2cbug- suppression diode 4pdt hh54pu-fl rm4cpug- hh54bu-fl rm4cbug- and led with surge single 2pdt hh52pu-cr rm2cpuc- hh52bu-cr rm2cbuc- hh52su-cr rm2csuc- suppression cr 4pdt hh54pu-cr rm4cpuc- hh54bu-cr rm4cbuc- hh54su-cr rm4csuc- with surge single 2pdt hh52pu-crl rm2cpua- hh52bu-crl rm2cbua- suppression cr and 4pdt hh54pu-crl rm4cpua- hh54bu-crl rm4cbua- led notes: 1. ul, csa, and t?v approved. 2. bifurcated contacts are all gold-plated silver contacts. 3. enter the coil voltage code in the mark. 4. for types with single contact other than high-capacity types, types with gold-plated silver contact are available on request. to order these types, add j to the ordering code. refer to the ordering code system. example: rm2cpj- (with gold-plated silver contact) rm2cp- (with silver contact: standard)
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/29 03 classification contact form mounting and plug-in pc board flange arrangement type ordering type ordering type ordering code code code with extra without led single 2pdt hh54-2p rm42p- hh54-2b rm42b- hh54-2s rm42s- pick-up bifurcated 2pdt hh54-2pw rm42pw- hh54-2bw rm42bw- hh54-2sw rm42sw- coil with led single 2pdt hh54-2p-l rm42pl- hh54-2b-l rm42bl- bifurcated 2pdt hh54-2pw-l rm42pwl- hh54-2bw-l rm42bwl- with surge single 2pdt hh54-2p-f rm42pf- hh54-2b-f rm42bf- hh54-2s-f rm42sf- suppression diode bifurcated 2pdt hh54-2pw-f rm42pwf- hh54-2bw-f rm42bwf- hh54-2sw-f rm42swf- with surge single 2pdt hh54-2p-fl rm42pg- hh54-2b-fl rm42bg- suppression diode bifurcated 2pdt hh54-2pw-fl rm42pwg- hh54-2bw-fl rm42bwg- and led with surge single 2pdt hh54-2p-cr rm42pc- hh54-2b-cr rm42bc- hh54-2s-cr rm42sc- suppression cr bifurcated 2pdt hh54-2pw-cr rm42pwc- hh54-2bw-cr rm42bwc- hh54-2sw-cr rm42swc- with surge single 2pdt hh54-2p-crl rm42pa- hh54-2b-crl rm42ba- suppression cr and bifurcated 2pdt hh54-2pw-crl rm42pwa- hh54-2bw-crl rm42bwa- led industrial control relays miniature control relays hh52, 53, 54 notes: ?bifurcated contacts are all gold-plated silver contacts. ?enter the coil voltage code in the mark. ?for types with single contact other than high-capacity types, types with gold-plated silver contact are available on request. to order these types, add j to the ordering code. refer to the ordering code system. example: rm2cpj- (with gold-plated silver contact) rm2cp- (with silver contact: standard)
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/30 industrial control relays miniature control relays hh52, 53, 54 sockets description standard * with surge suppression device used cr circuit 100v z-trap 200v z-trap mass with type ordering mass type ordering type ordering type ordering (g) code (g) code code code soldering tp58 rx58 9 hh52p tp511 rx51 10 hh53p tp514 rx54 10 hh54p pc board tp58b rx58b1 9 hh52p tp511b rx51b1 9.5 hh53p tp514b rx54b1 9.5 hh54p wire wrap tp58r2 rx58r2 10.5 hh52p tp511r2 rx51r2 11.5 hh53p tp514r2 rx54r2 12.5 hh54p rail mounting tp58x2 rx58x2 49 tp58x2-cr rx58x2-cr tp58x2-z/100 rx58x2-c1 tp58x2-z/200 rx58x2-c2 49 hh52p screw terminal tp511x2 rx51x2 50 tp511x2-cr rx51x2-cr tp511x2-z/100 rx51x2-c1 tp511x2-z/200 rx51x2-c2 50 hh53p m3.5 tp514x2 rx54x2 62 tp514x2-cr rx54x2-cr tp514x2-z/100 rx54x2-c1 tp514x2-z/200 rx54x2-c2 62 hh54p rail mounting tp58x1 rx58x1 32 tp58x1-cr rx58x1-cr 32 hh52p screw terminal m3.0 tp514x1 rx54x1 49 tp514x1-cr rx54x1-cr 49 hh54p note: *ul, csa and t?v approved mounting plates and rails tx16 sa-1644 mounting rail 900mm th35-7.5 rr7f th35-7.5al rr7a th35-15al rr15a type ordering socket capacity* code (max.) tx01 rz01 1 pc. tx16 rz16 16 pcs. tx19 rz19 19 pcs. tx18c rz18c 18 pcs. tx36c 1 rz36c1 36 pcs. notes: plates will accept both soldering terminal and wire wrap terminal sockets. * no. of relays to be mounted directly. th35-15al sg-34 minimum ordering quantity: 10 pcs. (1 pack) ordering information specify the following: 1. ordering code or type number 2. coil voltage 3. socket type number contact form blank: single w: bifurcated u: high capacity hh 5 4 p - ac110v50hz basic type contact arrangement 2: 2pdt 3: 3pdt 4: 4pdt 4-2: 2pdt (with extra pick-up coil) mounting method p: plug-in b: printed circuit board s: flange type number nomenclature relays coil voltage versions blank: standard f: with surge suppression device (dc) cr: with surge suppression divice (ac) r: magnetically held l: with indicator (led) fl: with surge suppression device and indicator (dc) crl: with surge suppression device and indicator (ac) contact material blank: ag j: au-plated ag basic type no. of blades 8: 8-blade (for 2pdt contacts) 11: 11-blade (for 3pdt contacts) 14: 14-blade (for 4pdt contacts) sockets tp 5 14 mounting and wiring blank: for soldering b: for printed circuit board r2: for wire wrap x2: for rail mounting (m3.5) x1: for rail mounting (m3) mounting plate
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/31 03 coil characteristics ac coil basic type hh52 hh54 hh52u hh54u hh52w hh54w hh53 contact form single bifurcated rated thermal current (a) 5 3 7553 rated insulation voltage 250v pick?p voltage (at 20? c) ac 80% of rated voltage dc 75% of rated voltage drop?ut voltage (at 20? c) ac 30% of rated voltage dc 10% of rated voltage max. power supply voltage 110% of rated voltage operating temperature ?5 to +70?c, no icing (?5 to +60?c for with operating indicator) dielectric strength 2000v ac rms, 1 minute between coil and contact 2000v ac rms, 1 minute between poles 1000v ac rms, 1 minute between open contacts 2000v ac rms, 1 minute between socket terminals insulation resistance 100m ? (500v dc megger) operating time 20ms or less vibration mechanical and malfunction durability: 10 to 55h z , 1mm double amplitude shock malfunction durability: 200m/s 2 mechanical durability: 1000m/s 2 durability mechanical ac ratings: 50 million operations dc ratings: 100 million operations contact resistance (before use) 50m ? max. mass approx. 33g specifications ? dc coil order voltage rated rated current coil coil power code voltage (ma) resistance color consumption (va) (v) 50h z 60h z ( ? ) 50h z 60h z ac6 6 200 167 10 clear 1.2 1.0 ac12 12 100 83 46 clear ac24 24 50 42 187 clear ac48 48 25 21 746 clear ac100 100/110 12/12.7 10/10.9 3680 green 1.2/1.4 1.0/1.2 ac110 110/120 10.9/11.7 9.1/10 4320 clear ac200 200/220 6/6.4 5/5.5 13400 yellow ac220 220/240 5.5/5.8 4.5/5 17200 clear order voltage voltage rated current coil coil power code resistance color consumption (v) (ma) ( ? ) (w) dc6 6 150 40 clear 0.9 dc12 12 75 160 black dc24 24 37 650 grape dc48 48 18.5 2600 red dc100 100/110 9.1/10 11000 blue notes: hh52pw, 54pw, hh54pu: au?lated ag contact as standard hh52p, 53p, 54p: ag contact as standard note: other voltages up to 130v dc are also available on request, contact fuji. industrial control relays miniature control relays hh52, 53, 54 note: other voltages up to 240v ac are also available, contact fuji.
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/32 basic type voltage single-phase * resistive load inductive load remarks motor (hp) ( a ) ( a ) (polarity) hh52p, 52b 52s 120v ac 1/6 5 1.5 same polarity between adjacent hh53p, 53b 53s 240v ac 1/4 5 contacts for inductive load 30v dc 5 2(15ms) opposite polarity for others 120v dc 0.3 0.2(15ms) hh54p, 54b, 54s 120v ac 1/10 3 1 same polarity between adjacent 240v ac 1/4 3 contacts for inductive load 30v dc 3 2(15ms) opposite polarity for others 120v dc 0.3 0.2(15ms) hh52pu, 52bu, 52su 120v ac 1/4 7 1.5 same polarity between adjacent 240v ac 3/4 7 contacts for inductive load 30v dc 7 2(15ms) opposite polarity for others 120v dc 0.3 0.2(15ms) hh54pu, 54bu, 54su 120v ac 1/8 5 1 same polarity between adjacent 240v ac 1/4 5 contacts for inductive load 30v dc 5 2(15ms) opposite polarity for others 120v dc 0.3 0.2(15ms) hh52pw, 52bw, 52sw 120v ac 1/6 5 1.5 same polarity between adjacent 240v ac 1/4 5 contacts for inductive load 30v dc 5 2(15ms) opposite polarity for others 120v dc 0.3 0.2(15ms) hh54pw, 54bw, 54sw 120v ac 3 1 same polarity between adjacent 240v ac 3 contacts for inductive load 30v dc 3 2(15ms) opposite polarity for others 120v dc 0.2 0.2(15ms) hh52w 150 400 660 260 560 1000 300 1000 500 1800 300 2400 200 800 hh54 hh54u 80 200 330 130 280 500 150 500 250 900 150 1200 100 400 power factor or time constant cos = 0.3 to 0.4 cos = 0.3 to 0.4 cos = 1 cos = 1 t=15msec. t=0msec. hh52u 1000 2000 3500 1500 3300 6000 1200 4000 1700 6000 1000 8400 1000 4500 hh54w 80 70 120 130 60 120 400 100 make current (a) 10 5 3 10 5 3 3 1 3 1 1 0.2 3 1 voltage 200v ac ind. load 100v ac ind. load 200v ac res. load 100v ac res. load 24v dc ind. load 24v dc res. load operating current and electrical durability power factor or time constant cos = 0.7 cos = 0.7 cos = 1 cos = 1 t=15msec. t=0msec. hh52, hh53 400 1000 1700 700 1500 2800 600 2000 1000 3400 500 4000 400 1600 electrical life ( 10 3 operations) break current (a) 1 0.5 0.3 1 0.5 0.3 3 1 3 1 1 0.2 3 1 ratings (ul and csa) note: *ul and csa approvals only. industrial control relays miniature control relays hh52, 53, 54
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/33 03 industrial control relays miniature control relays hh52, 53, 54 hh52, hh54-2 hh53 hh54 kkd05-132 hh54p p.c. board pc board drilling hh52s, 53s*, 54s* * number of terminals are different from hh52s. kkd05-140 kkd05-134 hh52b hh53b hh54b hh52b, 53b*, 54b* flange panel drilling wiring diagrams dimensions, mm/relays plug-in hh53p hh52p 4 8 12 1 5 9 14 13 0.5 27.8 21 2.8 1.2 2.2 5.7 34.9 3 14 13 0.5 27.8 21 2.8 1.2 2.2 5.7 34.9 6 9 2 5 8 1 4 7 4 8 12 1 5 9 14 13 0.5 27.8 21 2.8 1.2 2.2 5.7 34.9 3 7 11 2 6 10 4 8 12 1 5 9 0.5 21 3 7 11 2 6 10 13 14 27.8 6.5 1 3.7 34.9 13.2 4.1 12.7 6.4 8-?.5 13.2 4.1 12.7 6.4 11-?.5 13.2 4.1 12.7 6.4 14-?.5 4.4 * number of terminals are different from hh52b. 4 8 12 1 5 9 14 13 3 7 11 2 6 10 8 3.5 0.5 28.2 34 43 21.7 2.8 1.2 2.2 34.6 5.7 2 38 0.1 2-?.5 44 38 0.1 23 2-?.5 4812 159 14 13 3 6 14 9 2 5 8 1 4 7 13 4 8 14 12 13 3 7 11 2 6 10 1 5 9
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/34 industrial control relays miniature control relays hh52, 53, 54 p.c. board wire-wrap af91-876 tp511b af91-875 af91-877 tp511r2 tp514r2 tp58r2 tp58 tp58b tp514b tp514 tp511 panel cutting dimensions, mm/sockets soldering pc board drilling panel cutting 25.4 28.9 2 21 21.6 4812 14 15913 approx. 27 5 38 7.3 3 1.2 2.9 9 25.4 28.9 2 21 21.6 36914 14713 approx.27 5 38 7.3 3 1.2 2.9 9 258 25.4 28.9 2 21 21.6 4812 14 15913 3711 2610 7 1.5 0.3 38 5 4.3 9 2.9 approx.30 25.4 28.9 2 21 21.6 4812 14 15913 apprpx.27 5 38 7.3 3 1.2 2.9 9 3711 2610 8-? 6.4 4.1 12.7 13 . 2 1 1-? 6.4 4.1 12.7 13 . 2 1 4-? 6.4 4.1 12.7 13 . 2 4.4 2.9 38 13.1 22 approx.27 5 1.3 1.45 stem dimension 25.4 28.9 21 21.6 4 1 8 5 12 9 14 13 2 2.9 38 13.1 22 approx.27 1.3 1.45 stem dimension 25.4 28.9 21 21.6 4 3 2 1 8 7 6 5 12 11 10 9 14 13 2 2.9 38 13.1 22 approx.27 5 1.3 1.45 stem dimension 25.4 28.9 21 21.6 3 2 1 6 5 4 9 8 7 14 13 2 25.8 0.2 31.25 21.5 0.2 25.8 0.2 31.25 21.5 0.2 mass: approx. 10g mass: approx. 10g mass: approx. 10g tp58b, tp511b, tp514b mass: 58b approx. 9g 511b, 514b approx. 9.5g mass: approx. 10.5g mass: approx. 11.5g mass: approx. 12.5g
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/35 03 industrial control relays miniature control relays hh52, 53, 54 mounting plates fuji can supply very convenient mounting plates which can accept either 1, 16, 18, 19, or 36 panel mounting miniature relays. these mounting plates use plug-in relays with sockets, which are held in position by "snap-in" clips. tx01 tx16, tx19 sp-1023 panel cutting tx18c tx36c1 sp-1024 33 2-?.6 or m3 +3 ?.2 25 33 1 0 0.2 1.6 14.7 2.5 socket panel 32 25.8 2-?.6 40 33 21.6 26 25.8 l 31.25 15.6 25.8 9 42 34 21.6 4.5 t=1.6 mass: approx. 5.8g mass: approx. 155g description hole l distance distance tx19 19 594 562.5 type tx16 16 500 468.7 mass: approx. 325g mass: tx16 approx. 130g tx19 approx. 160g finger protection covers quick-mounting type cover the cover can be quickly mounted on or removed from the tp series socket used with hh series control relay, even if sockets are mounted side-by-side. mountable any time the cover can be mounted on or removed from the socket at any time before or after wiring the terminals. types type used with rz52x1 tp58x1 socket for hh52p miniature control relay rz54x1 tp514x1 socket for hh54p miniature control relay fx14x2 tp58x2 socket for hh52p miniature control relay tp514x2 socket for hh54p miniature control relay af91-868 fx14x2 24.5 32.4 69 59 fx14x2 (32) 13.4 3 6.5 69 22 ? 17.6 (32) 14.3 4 29 69 ? (32) 14.4 3 rz52x1 rz54x1 fx14x2 mass: approx. 2g mass: approx. 2.5g mass: approx. 2.7g dimensions, mm 21.6 9 13.1 27.4 465.8 492 25.8 42 49 4.5 t=1.6 492 27.4 9 21.6 6.6 92.1 84 37.4 73.2 25.8 4.5 t=1.6
fuji electric fa components & systems co., ltd./d & c catalog information subject to change without notice 03/36 dimensions, mm sockets for rail mounting screw terminal m3.5 industrial control relays miniature control relays hh52, 53, 54 tp58x2 (for hh52p) mounting rails th35-7.5 th35-7.5al th35-15al mass: 290g mass: 145g mass: 320g tp58x1 (for hh52p) screw terminal m3 tp511x2 (for hh53p) mass: 49g mass: 50g tp514x2 (for hh54p) mass: 62g tp514x1 (for hh54p) mass: 32g mass: 49g wiring diagrams 79 (th35-15) 71.5 (th35-7.5) 22.6 25 approx.39 29 10.5 32.4 mounting hole 2? x4.5 41 85 12 9 14 terminal m3.5 x 8 2 9 69 4 8 12 14 1 5 9 13 mounting rail wiring diagrams 6 41 5 8 12 14 13 9 22 69 terminal m3 x 8 4.5 15 2? x 4.5 mounting hole 21 25 approx.39 29 10.5 9 4 8 12 14 1 5 9 13 mounting rail 79 (th35-15) 71.5 (th35-7.5) 32.4 69 6.8 16.8 3.5 mounting hole 2? x4 .5 terminal m3.5 x 8 78 (th35-15) 70.5 (th35-7.5) 23.6 24.8 approx.38 30 11.8 10.6 5 mounting rail 3 6 9 14 13 2 5 8 1 4 7 6 29 69 terminal m3 x 8 4.5 15 2? x 4.5 mounting hole 22.6 25 39 29 10.5 9 mounting rail 8 12 14 13 3 7 11 2 6 10 1 5 9 4 79 (th35-15) 71.5 (th35-7.5) 22.6 25 approx.39 29 10.5 32.4 32 865 12 9 4 terminal m3.5 x 8 2 4 x 4.5 mounting hole 2 9 69 7 1 14 11 10 8 12 14 13 3 7 11 2 6 10 1 5 9 4 mounting rail 79 (th35-15) 71.5 (th35-7.5) 27 900 35 7.5 1 10 20 44 x 20=880 12.7 5.5 20 27 900 35 7.5 1 10 20 44 x 20=880 12 5.5 20 27 900 35 15 1 10 20 44 x 20=880 12 5.5 20 25

▲Up To Search▲

Price & Availability of HH53PAC12V50HZ

	To Download HH53PAC12V50HZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .